Connectors and wire



Product Compare (0)


2 pin mini timer connector

2 pin mini timer connector

2 pin mini timer connector, also known as EV1 injector connector. Commonly used for fuel injectors a..

$10.00 Ex Tax: $10.00

2 pin MQS connector

2 pin MQS connector

This is a 2 pin TE MQS connector, part number 1-967644-1Applications include but are not limited to:..

$10.00 Ex Tax: $10.00

DID1 spare connectors

DID1 spare connectors

Spare connectors and crimp terminals for the DID1 ECU...

$20.00 Ex Tax: $20.00

DSL1 plug-in adaptor for W210, W202 and G-wagen

DSL1 plug-in adaptor for W210, W202 and G-wagen

This adaptor allows the DSL1 ECU to be wired into a W210, W202, G-wagen or Sprinter that comes stand..

$150.00 Ex Tax: $150.00

GM coolant temperature sensor connector

GM coolant temperature sensor connector

This is a push to seat connector for GM coolant temperature sensors.Includes crimp terminals and sea..

$7.00 Ex Tax: $7.00

GM IAT sensor connector

GM IAT sensor connector

This is a push to seat connector for the GM inlet air temperature sensors.Includes crimp terminals a..

$7.00 Ex Tax: $7.00

K thermocouple mini female connector

K thermocouple mini female connector

Standard mini thermocouple connector, K type. ..

$6.00 Ex Tax: $6.00

K thermocouple mini male connector

K thermocouple mini male connector

Standard mini thermocouple connector, K type. ..

$6.00 Ex Tax: $6.00

K thermocouple wire

K thermocouple wire

K type thermocouple wire with a green (IEC standard) high temperature PTFE jacket (260°C rated). Mul..

$10.00 Ex Tax: $10.00

LSU4.9 connector

LSU4.9 connector

This is a harness side connector that fits the LSU4.9 lambda sensor...

$15.00 Ex Tax: $15.00

Mercedes 3 pin connector

Mercedes 3 pin connector

This connector is used for the cam position sensor on OM61x and OM64x engines, as well as ignition c..

$12.00 Ex Tax: $12.00

Mercedes accelerator pedal position sensor plug

Mercedes accelerator pedal position sensor plug

This is the connector used on about every Mercedes Benz with drive by wire manufactured from the mid..

$18.00 Ex Tax: $18.00

Mercedes Benz glow relay connector

Mercedes Benz glow relay connector

This is a 3 pin TE MQS connector, part number 1-967642-1 as used on the Mercedes Benz PWM glow plug ..

$10.00 Ex Tax: $10.00

Mercedes common rail injector connector

Mercedes common rail injector connector

This is the connector used for Mercedes and many other Bosch common rail injectors. It is also used ..

$12.00 Ex Tax: $12.00

Mercedes MAF or VNT connector

Mercedes MAF or VNT connector

This connector is used for MAF sensors on various Mercedes engines including but not limited to the ..

$10.00 Ex Tax: $10.00

OBD2 female connector

OBD2 female connector

This is an OBD2 connector with mounting flanges on two sides, perfect for retrofit if your car does ..

$10.00 Ex Tax: $10.00

Pre crimped wires for DID1

Pre crimped wires for DID1

These are 30cm (12") long 0.5mm2 (20awg) wires with an MQS terminal crimped on one end for easier ad..

$6.00 Ex Tax: $6.00

Pressure sensor connector

Pressure sensor connector

This is a push to seat version of the GT150 3 pin connector used on most aftermarket automotive flui..

$10.00 Ex Tax: $10.00

Spare mini-fit jr connector

Spare mini-fit jr connector

A spare connector including crimp terminals, suitable for numerous control units.Used on the followi..

$5.00 Ex Tax: $5.00

Showing 1 to 19 of 19 (1 Pages)