• DSL1 ECU

A diesel engine controller for engines equipped with a Bosch M-type EDC electronic diesel injection pump, such as Mercedes Benz OM605 and OM606, as well as VP37 injection pumps found on lots of different cars. See product's home page for more information.


Package contents:

  • DSL1 electronic control unit
  • 6 pin mini-fit jr connector
  • 8 pin mini-fit jr connector
  • 24 pin mini-fit jr connector
  • Crimp contacts for connectors
  • 1.5 metre USB A-B cable


Ordering options:

  • Internal data logging memory allows the controller to record a data log when no laptop is connected for retrieval later using a laptop. Without this option, data logging can be performed only while a laptop is connected. 
  • Needle lift sensor adds an amplifier module that turns digital input 0 into a low voltage input for processing the needle lift timing signal found on engines with VP37 rotary distributor pumps.
  • Extended I/O option adds 8 extra analog inputs, 2 extra digital inputs and 4 extra low-side switch outputs. See product's user manual for more information.
  • Now also available in a 24 volt version. The 24 volt kit is a modified controller that can drive 24 volt injection pumps and peripherals plus a voltage converter to power the controller itself.

Plug and play wiring adaptor is also available for easy fitment to standard Mercedes Benz cars with OM605, OM606 and OM602.98x engines.

DSL1 ECU

  • $649.00

  • Ex Tax: $649.00

  • 3 or more $520.00

Available Options


Related Products

4 bar MAP sensor

4 bar MAP sensor

This is a GM package 4 bar MAP sensor. This 4 bar MAP sensor offers a linear output in the 0.1 to 4...

$55.00 Ex Tax: $55.00

MAC 3 port boost control valve

MAC 3 port boost control valve

This is a MAC Valves Inc. 35A-ACA-DDBA-1BA three port solenoid valve suitable for turbocharger boost..

$60.00 Ex Tax: $60.00

Mercedes accelerator pedal position sensor plug

Mercedes accelerator pedal position sensor plug

This is the connector used on about every Mercedes Benz with drive by wire manufactured from the mid..

$18.00 Ex Tax: $18.00

EDC injection pump fuel inlet adapter

EDC injection pump fuel inlet adapter

This is an adapter made by Elbe Engineering that converts the fuel inlet port on the OM605/OM606 EDC..

$60.00 Ex Tax: $60.00

5 bar MAP sensor

5 bar MAP sensor

This is a 5 bar MAP sensor in a stainless steel package with 1/8" NPT threaded connection. When used..

$88.00 Ex Tax: $88.00

OBDLink LX bluetooth adapter

OBDLink LX bluetooth adapter

This is the premium OBD2 to Bluetooth adapter on the market. There are other lower cost options but ..

$125.00 Ex Tax: $125.00

OBD2 female connector

OBD2 female connector

This is an OBD2 connector with mounting flanges on two sides, perfect for retrofit if your car does ..

$10.00 Ex Tax: $10.00

Mercedes Benz Accelerator position sensor

Mercedes Benz Accelerator position sensor

Perfect for engine swaps, this sensor is easily adapted to any cable operated accelerator pedal to c..

$120.00 Ex Tax: $120.00

Hall effect gear tooth sensor

Hall effect gear tooth sensor

Part number GS100102, this is the formerly Cherry, now ZF Electronics gear tooth sensor.12mm diamete..

$99.00 Ex Tax: $99.00

7 bar MAP sensor

7 bar MAP sensor

Perfect for exhaust manifold pressure or boost pressures up to about 5.5 bar at sea level.This is a ..

$150.00 Ex Tax: $150.00

DSL1 plug-in adaptor for W210, W202 and G-wagen

DSL1 plug-in adaptor for W210, W202 and G-wagen

This adaptor allows the DSL1 ECU to be wired into a W210, W202, G-wagen or Sprinter that comes stand..

$150.00 Ex Tax: $150.00

LPCX2 I/O expansion board

LPCX2 I/O expansion board

This expansion board fits inside LPC4 (all variants) and DSL1 ECUs (Serial number 200 and up) and ad..

$220.00 Ex Tax: $220.00

AEM X series wideband lambda gauge

AEM X series wideband lambda gauge

The AEM X series 30-0300 wide band lambda gauge is a good companion for diesel or petrol tuning..

$250.00 Ex Tax: $250.00

AEM X series wideband lambda controller

AEM X series wideband lambda controller

The AEM X series 30-0310 wide band lambda controller is a good companion for diesel or petrol t..

$230.00 Ex Tax: $230.00

Pre crimped TXL wire for LPC4/LPC8/DSL1/MPC1

Pre crimped TXL wire for LPC4/LPC8/DSL1/MPC1

This is high temperature (125°C) automotive TXL wire, 20AWG (rougly 0.5mm²).The wires are white and ..

$12.00 Ex Tax: $12.00

Mini Fit Jr pin extraction tool

Mini Fit Jr pin extraction tool

Molex part number 11030044, a tool to extract the pins from the Mini Fit Jr connectors used on ..

$35.00 Ex Tax: $35.00

12 position cal pot

12 position cal pot

AEM part number 30-2056, calibration switch with adjustable end stop allowing anywhere between 2 and..

$50.00 Ex Tax: $50.00

Tags: ecu, dsl1, diesel, om605, om606